This video emphasizes the critical importance of proper striker spring preloading in striker-fired handguns to prevent malfunctions, especially during rapid fire. The presenter explains that the recoil spring should have at least one to two pounds of extra preload compared to the firing pin spring to ensure proper lock-up times. Failure to do so can lead to rare but potentially damaging incidents. The issue is not brand-specific but inherent to all striker-fired designs. The video strongly advises verifying that the firearm remains in battery with the striker fully cocked after any spring modifications (lighter recoil spring or heavier firing pin spring). Safety warnings regarding handling live ammunition and proper firearm maintenance are also included.
This YouTube video, "Calico Reliability Testing: Round 4, the Saga Continues...", continues the ongoing evaluation of a Calico firearm. Following previous malfunctions, the creator has performed a thorough cleaning and replaced the striker spring. The primary goal of this round of testing is to determine if these maintenance actions have restored the Calico's reliability. The video also promotes the creator's Patreon and merchandise.
This video provides essential advice for new Glock owners, or any semi-automatic pistol owner, on critical replacement parts to keep on hand. Brownells Gun Techs Steve and Caleb highlight components that experience wear over time, such as the recoil spring assembly (recommended replacement every 5,000 rounds), striker spring, extractor spring, and magazine springs. They also advise having spare magazine followers and base plates, especially for competition use, or simply stocking up on extra factory Glock magazines. The importance of having spare pins and other small parts, which are prone to getting lost during disassembly, is also emphasized. The video aims to equip viewers with the knowledge to proactively maintain their firearms.
This video addresses an issue of primer drag in firearms, specifically mentioning the Springfield Armory XD. The creator explores the potential role of a firing pin dampening spring and a stronger striker spring in causing or mitigating this problem. While initially suggesting the dampening spring as a solution, an update reveals it had minimal impact. Further testing with stock and extra-power striker springs also yielded similar results, confirming that primer drag is a common characteristic of locking breech handguns and the dampening spring isn't a complete cure. The video concludes that replacing the dampening spring is still a good practice when changing the striker spring, just to be safe.
You've reached the end! 4 videos loaded.
